Stream Boiler

Thermeon (Teon)

Range:
Capacity : 300,500,750,1000,1500 Kg/Hr
Fuel : Solid Fuel/Biomass Fuel
Pressure : 7 Kg/Cm2g / 10.54 Kg/Cm2g

Application:
Steam Boiler for Process Heating

Product Info
Thermeon is small capacity compact boiler for varirty of fuel application.

Product Feature:
Completely Paneled and Ultra-compact – Best Aesthetics in range
Integrated Heat Recovery Unit – High Fuel Efficiency
Bigger Fire Door – Easy Fuel Feeding
Centrifugal Pump – Highly Flexible and Continuous Operation
FD & ID Fan – No Back Firing, Instant and Complete Combustion
Automatic Pressure Switch – High Safety & Reliable Performance

Combloc (CB)

Range:
Capacity : 1.5 to 10TPH
Fuel : Solid Fuel/Biomass Fuel
Firing : Manual/Automatic
Combustor : Stationary Grate/Bubbling Bed/Reciprocating Grate
Pressure : 10.54/17.5/24 Kg/Cm2g

Application:
Steam Boiler for Process Heating

Product Info
So far, the two major options for a solid fuel fired steam boiler were the Integrated Furnace Boiler and the conventional Hybrid Boiler. This meant that the choice boiled down to the reduced site work and better response to load of the Integrated Furnace Boiler, versus the promise of higher efficiency and fuel flexibility of the conventional Hybrid Boiler.What remained unexplored was the ideal solution -the best of both these designs packed into one boiler.But not any more. Because Combloc, the newest offering from the Thermax stable, is an amalgam of the best of these two designs and represents the future of packaged, multi-fuel fired steam boilers.This robust product is a highly compact, efficient, plug and play packaged boiler, designed to meet your steam requirements today and tomorrow.

Product Feature:
Compact, skid mounted and modular construction – up to 40% reduction in foot print
Pre-insulated and factory assembled – up to 80% reduction in site work
Flexibility of fuels (Biomass/ Fossil) and combustors
Quick startup and better response to load fluctuations
Multi-pass hybrid construction with high combustion volume – better efficiency
Easy ash removal and better accessibility for maintenance

Combipac

Range:
Capacity : 4 to 30 TPH
Fuel : Solid Fuel/Biomass Fuel
Firing : Manual/Automatic
Combustor : Stationary Grate up to 8TPH/ Fluidized Bed
Pressure : 10.54/17.5/24 Kg/Cm2g

Application:
Steam Boiler for Process Heating

Product Info

The Combipac boiler with its high performance and automatic modern styling confirms to the most exacting standards of safety, performance and efficiency. This boiler is manufactured with the latest engineering techniques, modern production equipment and with the expertise of highly skilled engineers and workers. The most critical parts used in Combipac are the best in the world by any standards.

The performance of Combipac depends not only on your own alertness and on familiarity with the boiler and its components, but on its mechanical installation, running attention, and maintenance as well. Our efficient, highly qualified specially trained service personnel are available for guidance in installation, operation and maintenance of this boiler.

Powemax/Bi Drum (BD)

Range:
Capacity : 6 to 50 TPH
Fuel : Solid Fuel/Biomass Fuel
Firing : Automatic
Combustor : Fluidized Bed/Travelling Grate/Reciprocating Grate
Pressure : 11.25/17.5Kg/Cm2g (Saturated) 32/380, 45/450, 67/490 (Superheated)

Application:
Steam Boiler for Process Heating & Power application

Product Info

Bi-Drum boiler is generally used to generate high steam-pressure required for incidental power generation or cogeneration. It is also used for saturated steam applications, which demand uninterrupted operation on highly choking fuels. This boiler is rugged and can operate continuously throughout the year. In addition, since it has small water content, it responds rapidly to changes in loads and heat inputs.

In Bi-Drum boilers, water is circulated inside the tubes, with the heat source surrounding them. The energy from the heat source may be extracted as radiant or convective & conduction. The furnace or radiant section is an open area accommodating the flames. The walls of the furnace section are lined with finned tubes called membrane panels, which are designed to absorb the radiant heat from the flame.

The convection section is designed to absorb the heat from hot gases by conduction and convection.

Powerpac/Single Drum (SD)

Range:
Capacity : 6 to 16 TPH
Fuel : Solid Fuel/Biomass Fuel
Firing : Automatic
Combustor : Fluidized Bed/Travelling Grate/Reciprocating Grate
Pressure : 11.25/17.5Kg/Cm2g (Saturated) 32/380, 45/450 (Superheated)

Application:
Steam Boiler for Process Heating & Power application

Product Info

Water tube & smoke tube boilers are popular with co-generation & process heating industry respectively. Water tube boilers are known for efficient & reliable operation. Smoke tube boiler which are packaged in nature, are easy to install & maintain. Thermax presents PowerpacTM – First of a kind packaged, modular construction, water tube boiler to address both, process heating & co-generation requirements.

PowerpacTM boiler are offered along with flexible combustor solutions to cater to wide range of fossil & biomass fuels. Fully packaged, modular construction water tube design ensures highest uptime, lowest installation time / cost and most efficient operations. PowerpacTM boilers truly combines the benefits of site erected water tube boilers & package smoke tube/hybrid boilers.

Product Feature

  • Fully Packaged Boiler
  • Water Tube Design
  • Multi-Fuel Flexibility
  • Modular Construction
  • Compact Layout
  • Best in class Efficiency
  • Easy to Operate
  • Easy to Maintain
  • In house manufacturing

Woodpac (WP)

Range:
Capacity : 2 to 4.5TPH
Fuel : Wood Waste
Pressure : 10.54Kg/Cm2

Application:
Steam Boiler for Process Heating

Product Info

Woodpac is a two-pass, smoke tube boiler that can be fired on wood and optionally on oil. The boiler has a corrugated furnace all along its length. The front end and shell rear end is closed with the help of tube sheets. The flue tubes are fitted between the front and rear tube sheet. The flue tube opens into the smoke chamber. The pressure part consists of shell, tube sheets, valves & fittings, (level gauge, Mobrey) feed water piping etc. Smoke chamber and the refractory door is mounted at front and rear respectively. Spirals are provided inside the smoke tube to improve the effectiveness of heating surface. The rear door when opened, gives total access to the furnace, smoke tubes and spiral agitator. The cylindrical boiler shell is fully covered with glass wool insulation and enclosed in a sheet at site. Two electrically driven water pumps centrifugal multi-stage type, are mounted separately.

Product Feature

  • Low cost heating
  • Integral furnace with spirals in the tubes – ensures high rate of heat transfer
  • Low stack temperature at boiler outlet
  • Hinged smoke chamber, making cleaning of tubes easy, also facilitates settling of ash
  • Supplied with forced draft primary air fanProvided with secondary air ducting for complete combustion of wood
  • Wood fired boiler
  • Electrically driven water pumps

Thermosyphon (SFTS)

Range:
Capacity : 0.2 Mn Kcal/Hr to 6Mn Kcal/Hr
Fuel : Solid Fuel/Biomass Fuel

Application:
High Pressure Boiler for deodorizing Process in Edible oil Refinery

Product Info

This Thermosyphon boiler is a closed loop, high-pressure natural circulation unit using water as the heating media. It has a distinct advantage over traditional industrial heating systems like steam or thermic-fluid. Typical applications of the Thermosyphon includes deodorisation of edible oil at high temperature.

Product Feature

  • Completely automatic and suitable for unmanned operation
  • Multi-fuel option – Indian & imported coal, rice husk, etc.
  • Works on the principle of natural circulation – no pump required
  • Requires minimum maintenance
  • Multi-start helix angle guards against vapour lock

Steamatic (SG)

Range:
Capacity : 50 to 100Kg/Hr
Fuel : Oil/Gas

Application:
Steam Boiler for Process Heating

Product Info

Steamatic is a highly reliable, packaged instant steam generator suitable for steam or hot water requirements in laundries or factory canteens. Steamatic is a compact, hassle-free alternative solution to cut down operating costs of these small heating loads, replacing expensive electrical systems.

In addition, the large diameter of the pressure part tubes and the transparent filter is specially designed to spot sludge or rust, preventing coil choking, thus reducing downtime of boilers.

Product Feature

  • Instant steam generator
  • Low cost alternative heating for laundries, canteens, etc.
  • Skid mounted packaged heating unit with mono-block burner
  • Multi-fuel option – HSD/natural gas/LPG
  • High efficiency of about 90%
  • Protected against low/no water flow
  • Flame failure alarms
  • Electrical overload lockout

Revomax (RX)

Range:
Capacity : 200 to 850Kg/Hr
Fuel : Oil/Gas

Application:
Steam Boiler for Process Heating

Product Info

Revomax, is a versatile, fully automatic, instant steam generating range of boilers designed for safe and reliable operations. Easy to install and commission, these time-tested boilers require very little maintenance. It features a specially designed furnace and combustion system to burn difficult heavy oils and offers fuel flexibility between light and heavy oils to help respond to fluctuating fuel prices.

Product Feature

Efficiency of 88% on NCV
Reverse fFlame technology
Unique patented membrane design
Built-in heat recovery device
Membrane design allows large tube diameter for coil enabling better steam dryness, less frequent de-scaling, longer coil life and minimum downtime
Unique economiser – optimiser design ensures maximum heat recovery without possibility of feed water pump failure due to boiling/ vapour causing cavitations and pump failure
Unique circulation burner design prevents leakage and eliminates fire hazard
Ceramic wool refractory allows fast cooling of top plate and easy maintenance
Easy access to all parts requiring maintenance
Powder-coated, well lit control panel for better life in industrial environment and easy monitoring

Shellmax (SM)

Range:
Capacity : 1 to 32TPH
Fuel : Oil/Gas
Std Design Pressure : 10.54/17.5Kg/Cm2g

Application:
Steam Boiler for Process Heating

Product Info

Shellmax is a packaged, three-pass smoke tube, with fully wet back boiler. It can also be customised to a completely skid mounted unit on customer demand. When fitted with a special burner, these boilers are ideal for burning waste gases like biogas from decomposition of organic matter in distilleries, corex gas from the steel manufacturing process and liquid fuels.

Product Feature

100% Skid mounted Plug and Play boiler
Multi-fuel option – light oils/heavy oils/gases
High efficiency of about 95%
High dryness fraction steam increases usable heat
Comes with mono-block/ dual block/steam atomised burner with world renowned technology from Oilon, Finland
Large water holding capacity
Corrugated furnaces for boilers above 6 TPH capacity
Optional 3-element control systems for close monitoring of water level, steam flow & feed water flow
ThermowizTM Panel & Thermowiz™ Plus panels for advance boiler monitoring & control

Thermosyphon (TS)

Range:
Capacity : 0.2Mn Kcal/Hr to 2.5Mn Kcal/Hr
Fuel : Oil/Gas

Application:
High Pressure Boiler for deodorizing Process in Edible oil Refinery

Product Info

The Thermosyphon unit is a closed loop, high-pressure natural circulation unit using water as the heating media. It has distinct advantage over traditional industrial heating systems like steam or thermic-fluid – it does not suffer from condensate losses or blow down losses observed in steam systems.

Thermosyphon prevents risk of contamination, especially in food products due to leakage of thermic fluid.

Product Feature

High capacity heating system
Multi-fuel option – oils and gases
Multi-start helix angle guards against vapour lock
Works on the principle of natural circulation – no pump required
Requires minimum maintenance
Completely automatic and suitable for unmanned operation